ResMed Swift FX frame system (without headgear), Large

ResMed Swift FX Frame System (without headgear) is a nasal pillow mask frame that offers a minimal design for a comfortable feel. The silicone frame lightly rests on the cheeks, giving the user the feeling that nothing is there. The frame is available in large size, which makes it suitable for most users. The ergonomic comfort of the minimal design allows for reading or watching TV at bedtime, even with glasses on. Nose coverage, nasal pillows mask, silicone cushion
Design is a predecessor to today's popular AirFit™ series
Prescription required for complete mask system
Improved nasal pillows provide a stable, lightweight headgear for added comfort
Quiet venting ensures a more peaceful sleep
Compatible with most CPAP machines
Easy to assemble and disassemble for cleaning

See the full list of product ingredients on the product label. Please see the full list of product ingredients on the product label.

See directions below. Daily/After each use: Disassemble the mask components according to the disassembly instructions
Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 86°F/30°C) water using mild soap
To optimize the mask seal, facial oils should be removed from the cushion after use
Use a soft bristle brush to clean the vent
Inspect each component and if required, repeat washing until visually clean
Rinse all components well with drinking quality water and allow to air dry out of direct sunlight
When all components are dry, reassemble according to the reassembly instructions
Weekly:
Handwash the headgear

This mask is not compatible for use with ResMed AutoSet CS™ 2 and VPAP™ Adapt SV devices. SmartStop may not operate effectively when using this mask with some CPAP or bilevel devices that have this feature. If you experience nasal dryness or irritation, use of a humidifier is recommended. The vent holes must be kept clear
The mask should not be used unless the CPAP system is turned on and operating properly
Follow all precautions when using supplemental oxygen
Oxygen flow must be turned off when the CPAP or bilevel device is not operating, so that unused oxygen does no accumulate within the CPAP or bilevel device enclosure and create a risk of fire
At a fixed rate of supplemental oxygen flow, the inhaled oxygen concentration varies, depending on the pressure settings, patient breathing pattern, mask, point of application and leak rate
The technical specifications of the mask are provided for your clinician to check that they are compatible with the CPAP or bilevel device
If used outside specification or if used with incompatible devices, the seal and comfort of the mask may not be effective, optimum therapy may not be achieved, and leak, or variation in the rate of leak, may affect the CPAP or bilevel device function
Discontinue using this mask if you have ANY adverse reaction to the use of the mask, and consult your physician or sleep therapist
Using a mask may cause tooth, gum or jaw soreness or aggravate an existing dental condition. If symptoms occur, consult your physician or dentist
As with all masks, some rebreathing may occur at low CPAP pressures
Refer to your CPAP or bilevel device manual for details on settings and operational information
Remove all packaging before using the mask
If any visible deterioration of a system component is apparent (cracking, crazing, tears or cushion damage), the component should be discarded and replaced
Avoid connecting flexible PVC products (eg, PVC tubing) directly to any part of the mask